Stretch Ceiling Membrane Data Sheets – ASTM E84 and Light Transmission, CeilEx
For Architects & Specifiers

Membrane data,
open.

Seven CeilEx data sheets: the three opaque whites, transparent frost, both translucents and the translucent product sheet. Thickness, roll width, fire test values and measured light transmission, with every PDF one click away. No form, no sign-in.

These are the membrane data sheets an architect needs for a stretch ceiling submittal under Section 09 54 00 / 09 54 43. The values below are copied from each sheet, and the PDF is the document of record. Fire values are per finish; light transmission was measured at a university laboratory under CIE 130-1998.

Seven sheets, side by side.

Values from the CeilEx membrane data sheets, Rev. 1, July 2026. Specimens for the fire values were white.
MembraneUseThicknessWeight Roll widthFire, ASTM E84 (FSI / SDI)Light transmissionData sheet
White GlossMDS-104 Ceilings and walls, reflective finish 0.008 in (0.20 mm) ~0.041 lb/ft² (~200 g/m²) to 16 ft 5 in (5.0 m) 5 / 300Intertek M2097.01-121-24 Opaque MDS-104 PDF
White MatteMDS-105 Ceilings and walls, flat finish 0.0073 in (0.185 mm) ~0.038 lb/ft² (0.185 kg/m²) to 16 ft 5 in (5.0 m) 10 / 300Intertek M2097.02-121-24 Opaque MDS-105 PDF
White SatinMDS-106 Ceilings and walls, soft-sheen finish 0.0073 in (0.185 mm) ~0.038 lb/ft² (0.185 kg/m²) to 16 ft 5 in (5.0 m) 15 / 250Intertek M2097.03-121-24 Opaque MDS-106 PDF
Transparent FrostMDS-101 Backlit features, light boxes 0.006 in (0.15 mm) ~0.031 lb/ft² (~150 g/m²) to 16 ft 5 in (5.0 m) Range reports referenced (white film) 70.5% diffused, 96.1% directional MDS-101 PDF
Warm TranslucentMDS-102 Luminous ceilings and backlit walls 0.008 in (0.20 mm) ~0.041 lb/ft² (~200 g/m²) to 16 ft 5 in (5.0 m) Range reports referenced (white film) 42.0% diffused, 49.2% directional MDS-102 PDF
Cold TranslucentMDS-103 Luminous ceilings and backlit walls 0.008 in (0.20 mm) ~0.041 lb/ft² (~200 g/m²) to 16 ft 5 in (5.0 m) Range reports referenced (white film) 41.2% diffused, 48.2% directional MDS-103 PDF
Translucent membranes (both variants)PDS-110 Product data for backlit luminous ceilings and walls 0.185 to 0.23 mm by grade Not listed to 16 ft 5 in (5.0 m) Range reports referenced (white film) 42.0% / 41.2% diffused (Variant 1 / Variant 2) PDS-110 PDF

Which membrane for which ceiling.

Opaque ceilings and walls

White Matte is the flat white most specified for whole ceilings. White Satin gives a soft sheen, and White Gloss is the mirror finish. All three span seamlessly up to 16 ft 5 in.

Backlit, with an even glow

Warm and Cold Translucent scatter light strongly, which hides the individual LEDs behind the film. They transmit 42.0% and 41.2% of diffused light, so size the LED output up to compensate, which is standard luminous-ceiling practice.

Backlit, with maximum light

Transparent Frost transmits 70.5% of diffused light, but it does not hide the light source: LEDs close behind the film stay visible as points. Use it for light boxes and decorative features where that look is wanted.

How to read the fire values

The ASTM E84 values are reported per finish by Intertek (ASTM E84-21), in reports M2097.01, M2097.02 and M2097.03-121-24. Read them with these limits:

  • The specimens tested were white. The results cover white membrane only.
  • The laboratory assigned no class. The indices are reported values.
  • The specimens were mounted as recorded in the reports (ASTM E84 Annex A4), not under ASTM E2573.
  • The membrane is not for use in a return-air plenum, in any finish.

The full results and test conditions are in the Fire Performance Data Sheet (FPD-100, PDF), and the fire ratings explainer walks through what ASTM E84 measures.

Become a Dealer Call